Want to make yourself a beautiful pearl ring to happy yourself? Start with our tutorial!
Required materials and tools:
Material Needed:
（1）0.64mm, 0.25mm gold platedwire, 0.6mm gold plated wire.
（2）2.5mm pearl with half hole, a closed ring with 6mm parameter
（3） a bead chain with 3.1mm length.
Tools:
Ring stick, round nose pliers, needle-nosed pliers, cutting pliers
S1. First, make a ring on the ring stick with a square wire.
S2. Add two 0.64mm main WIRES, wiring them tightly with the "N+2"method showing in the picture.
S3, Wiring these wires just about half of the ring.
S4, At the tails on both sides, you can just open the tail line lightly.
S5, Using round nose pliers to make two small circles as decoration.
S6, Just take care of the remaining length. Leave enough residual line and make two circles at the end to finish the ring,
S7, We just use the remaining thin line with a gold bead to decorate the middle part of two small circles.
S8, On the top sides of the large circle, we also added a gold beads for decoration.
S9. Connect the closed loop and the bead chain with a thin wire with the "N+1" method.
S10. Complete this decoration component.
S11. Directly put this decoration component on the ring ndddle.
S12. Put some glue on the pearl, then rub it on the ring needle.
A gorgeous bling bling ring is made for you!
